Thermofoil, Polyester, Melamine Doors

It is recommended to use a damp cloth with water and dishwashing liquid to properly and safely clean thermofoil doors. You should dry the surface immediately with a clean cloth.

The use of abrasive or solvent-based cleaners is not suggested as it has the ability to damage the surface of the doors. This type of application would void the warranty on the doors.

In the event of a minor scratch you can start by applying a good quality auto wax then polish the surface with a carnauba wax paste.

Wood Doors

Wood doors should be cared for the same as you would any piece of fine wooden furniture.

Self-Cleaning Ovens

IMPORTANT! Self-Cleaning ovens work by generating extremely high heat. Any thermofoil or polyester (Prestige) doors and drawer fronts adjacent to the oven should be removed before you start the self-cleaning cycle.

How To Adjust Your Cabinet Doors

All Cabinetsmith cabinets feature genuine blum hinges. The blum "cliptop" hinge allows for easy adjustment, so the doors on your cabinets are positioned perfectly. There are three possible adjustments:

HEIGHT ADJUSTMENT

To move your door up/down, loosen the two screws on the mounting plate of each hinge. Adjust the door up/down, and retighten the screws.

SIDE ADJUSTMENT

To move your doors left or right, turn the screw indicated clockwise or counter-clockwise. Total adjustment is +/- 2 mm.

 

DEPTH ADJUSTMENT

To move your doors front to back, turn the spiral screw indicated clockwise or counter-clockwise. Total adjustment is + 3 mm /- 2 mm.

How to Adjust your Drawer Fronts

All Cabinetsmith cabinets feature blum "metabox" drawers. The drawer fronts can easily be adjusted for perfect positioning. There are two possible adjustments:

HEIGHT ADJUSTMENT

1. Loosen the screw indicated in the diagram below. Do this on both sides of the drawer.
2. Turn the adjustment screw on each side to adjust the drawer front up or down.
3. Retighten the screws.

SIDE ADJUSTMENT Loosen the screw indicated in the diagram to the right. Do this on both sides of the drawer. Move the drawer front left or right, as desired. Re-tighten both screws.